Recent solar installation completed in Surrey, BC. This ground mount array consists of 24 Canadian Solar modules and will produce over 6000 kWh of solar energy per year.
Our largest installation to date, this system was designed with one big goal in mind: power generation. This install involved a large amount equipment and hours but will generate enough power for several homes. This installation was also deceptively complex as each bank of panels needed to be levelled, angled, and located so as so […]
This installation was designed to provide energy for an automatic lighting system and various monitoring devices inside a barn. This involved calculating the energy usage of each device and light. Once the energy usage was determined, we designed the system size (and cost) accordingly. This system ended up consisting of a fairly large array mounted […]
Another off-grid installation. This particular system is designed to power a sensor/pump for an semi-automated irrigation system. This allowed the owner to remotely water their plants during the summer months. The systems consists of several 12 volt batteries wired into a 24 volt system. During peak sun hours the panels will supply the system with […]
This particular system was created to provide power for a small detached studio which the owner wanted to be able to relocate if needed. The system is an off-grid installation as the overall energy demands of the studio are relatively low as there are no major appliances (refrigerator, stoves, air conditioners, etc.) which are constantly […]